Blower runs, no ignition
Often a pressure switch, a blocked vent or a split hose. We test each before replacing anything.
Coquitlam tank repair
Hot Water Tank Repair in Coquitlam
Flashing status lights, a fan that hums but no flame, or a pilot that dies overnight? Able Pro repairs hot water tanks in Coquitlam, from Burke Mountain power-vents to Maillardville classics.
- Power-vent fault repair
- Pilots and igniters
- On call 24/7
No heat, no hot water or a gas smell? Call any time, day or night.
GAS WATER HEATER · Schematic
- 24/7 emergency service
- Tri-Cities, Burnaby, Surrey, Pitt Meadows, Maple Ridge
- Clear quote before work starts
- Tidy, respectful work
- Furnaces and boilers
- Air conditioning
- Heat pumps
- Water heaters
- Book online in about a minute
Overview
Hot water tank repair in Coquitlam, old and new
Coquitlam's housing spans several generations, and so do its water heaters. Newer homes on Burke Mountain and Westwood Plateau often have power-vent tanks with electronic ignition, a blower, a pressure switch and a control board that flashes a fault code. Older homes in Maillardville and Austin Heights more often have a simple atmospheric tank with a standing pilot and a thermocouple.
Both can leave you without hot water, but the fix is very different. Hot water tank repair in Coquitlam starts with reading the fault code or watching the lighting sequence, then testing the part that failed. On power-vents, the trouble is frequently outside the tank: a blocked vent, a cracked pressure switch hose or condensate that has nowhere to drain.
On older tanks, a worn thermocouple or a tired gas valve is the usual story. Either way, you get a clear diagnosis and price before we repair.
Coquitlam tank faults we fix
Newer and older tanks fail in their own ways.
Flashing status codes
The control board tells us where to look. We read the code and confirm with testing.
Igniter or flame sensor
Electronic ignition parts wear out. A dirty flame sensor can make the burner light and drop out.
Thermocouple failures
On standing-pilot tanks, a weak thermocouple lets the pilot go out. It is a quick and common repair.
Gas valve problems
If the pilot lights but the burner will not, the gas control valve may have failed.
Vent and draft issues
Leaves, snow or nests at a side-wall vent, or poor chimney draft, can shut the tank down.
Local service
Repairs from Burke Mountain to Maillardville
On Burke Mountain, Westwood Plateau and Eagle Ridge, power-vent tanks are common, and many of our repairs involve vents, blowers and ignition controls. Snow and leaf buildup at side-wall vents is a regular winter cause.
In Maillardville, Austin Heights, Ranch Park and around City Centre, we see more standing-pilot tanks. Those calls often come down to the thermocouple, the gas valve or the chimney draft.
Included
What we test on Coquitlam repair calls
- Fault code or status light reading
- Blower motor and pressure switch operation
- Vent termination and pipe condition
- Igniter, flame sensor or thermocouple
- Gas pressure and gas control valve
- Condensate drainage on power-vent models
- Relief valve and connections for leaks
How it works
How we get you back in hot water
- 1
Describe the symptoms
Tell us about any flashing lights, noises or smells when you call or book.
- 2
Read and test
We read the code or watch the light-up sequence, then test the suspect part.
- 3
Repair with approval
You see a clear price, and we fix it, often from parts on the truck.
- 4
Run a full cycle
We confirm ignition, draft and temperature before we leave.
Why Coquitlam homeowners trust us
Power-vent experience
We know these systems well and check the vent, blower and switches together.
Testing over guessing
Parts are replaced because tests show they failed, not because they might have.
Honest repair advice
If the tank is leaking or too old to justify repair, we tell you plainly.
On call 24/7
Call (236) 222-2222 any time if your hot water stops.
Near you
Hot Water Tank Repair in nearby cities
More from Able Pro in Coquitlam
All services in CoquitlamHeating, cooling and hot water help for Coquitlam homes, from new builds on Burke Mountain to classic split-levels in Austin...AC InstallationIn a three-storey Westwood Plateau home the top floor can run several degrees warmer than the basement. We design cooling that...AC MaintenanceWhether your system came with a Burke Mountain new build or has cooled a Ranch Park home for years, regular maintenance keeps it...AC RepairCoquitlam air conditioners tend to fail on day three of a heat warning, when they have been running flat out. Our technicians are...AC ReplacementMany Coquitlam homes from the 1990s and 2000s got basic builder-grade cooling. Replacement is your chance to get a system that...Boiler InstallationHillside homes, radiant floors and multi-level layouts need a boiler that is sized and piped with care. We design the install...Boiler MaintenanceRadiant floors and multi-level systems stay comfortable when the boiler, water and controls are checked together. That is what...Boiler RepairGurgling upstairs, banging at night, a boiler that rumbles like a kettle. Noises are your system asking for help, and we know...Boiler ReplacementNot sure whether to fix your old boiler one more time or replace it? We give you a straight answer with the numbers and the...
Questions homeowners ask us
Still unsure? Call (236) 222-2222 and talk it through with us.
My Burke Mountain power-vent tank hums but won't light. What is wrong?
The blower is running, but the control is not getting confirmation of proper airflow, or the igniter is not working. A blocked vent, a cracked pressure switch hose or a failed igniter are common causes. We test them in order.
Why did my power-vent tank stop during a snowfall?
Snow can block the side-wall intake or exhaust terminal, and the safety switch shuts the burner down. Clearing it carefully may restore operation, but if it keeps happening the termination may need relocating.
How long does a thermocouple repair take?
Usually well under an hour once diagnosed. It is one of the most common and affordable hot water tank repairs.
Can I reset a power-vent tank myself?
Many models can be reset by turning the power off and on. If it locks out again, there is a real fault, so call us rather than resetting repeatedly.
Book your visit
Get your Coquitlam tank fixed
Call (236) 222-2222 now or book online. We will find the fault and give you a clear repair price.
Call or text, 24/7 for emergencies(236) 222-2222Request a visitTakes about a minute
We only use your details to arrange your visit.
Request received
Thanks! We will call you to confirm a time. Need us sooner? Call (236) 222-2222.