R-22 refrigerant
R-22 is no longer produced or imported in Canada, so any leak on an older system becomes very hard to repair sensibly.
When an older AC needs a compressor, uses R-22 or simply cannot keep up, we help you decide what to replace it with and install it properly.
No heat, no hot water or a gas smell? Call any time, day or night.
Nobody wants to replace equipment that could be repaired for a reasonable price. But there comes a point where a repair is just buying a few months. Air conditioning replacement usually makes sense when the compressor has failed, when a leak is in the coil itself, when the system still runs on R-22, or when repair bills are adding up every summer.
Replacing is also a chance to fix what was wrong with the original install. Maybe the old unit was oversized and left rooms clammy, or the condenser sat under the bedroom window. We look at all of it. And with refrigerant rules changing and heat pumps now able to heat well through most of our winters, a lot of homeowners are choosing to replace their AC with a heat pump that does both jobs.
One of these alone may not settle it, but two or three usually do.
R-22 is no longer produced or imported in Canada, so any leak on an older system becomes very hard to repair sensibly.
The compressor is the heart of the system. On an older unit, replacing it often costs a large share of a new system.
Formicary corrosion creates pinhole leaks in older copper coils. Once it starts, more leaks tend to follow.
If you are calling for service every summer, the money is better spent on equipment that is not wearing out.
A system that runs all afternoon during a heat wave and never reaches the setpoint may be undersized or simply worn.
Modern inverter units with higher SEER2 ratings use noticeably less power for the same cooling as units from the early 2000s.
We inspect the current system, calculate the cooling load and talk about what you liked and disliked about the old one.
Compare a straight AC with heat pump options, along with efficiency and noise levels, in a written quote.
Old refrigerant is recovered properly, old equipment is hauled away and the new system goes in with a fresh pad or bracket.
We vacuum, charge and test the new system, then show you the controls and any rebate paperwork steps.
If your current unit has more years in it, we will tell you. Replacement should be a choice, not a sales script.
We install both and can explain how each would perform in your particular home.
We confirm which programs currently apply and help you through the application.
Old equipment recovered, removed and recycled, with the site left tidy.
Still unsure? Call (236) 222-2222 and talk it through with us.
Usually not. The outdoor condenser and the indoor coil are designed as a matched pair, and newer refrigerants need compatible components. Mixing old and new parts typically hurts efficiency and reliability.
New residential systems are moving to lower global warming refrigerants such as R-454B and R-32, replacing R-410A. We explain what the equipment you choose uses and what that means for future service.
If you heat with gas or electric baseboards and want lower heating costs or fewer emissions, a heat pump is worth serious thought. It costs more upfront than a straight AC but replaces part of your heating load too.
Most straightforward swaps are completed in a day. Adding a new line set, changing the location or upgrading electrical can add time, and we will tell you in advance.
Not always. If the furnace is in good shape and its blower suits the new coil, we can replace the cooling side alone. If the furnace is nearing the end of its life, doing both together can save a second disruption.
Call (236) 222-2222 or book online for an honest replacement assessment from Able Pro.
Call or text, 24/7 for emergencies(236) 222-2222We only use your details to arrange your visit.
Thanks! We will call you to confirm a time. Need us sooner? Call (236) 222-2222.