Gas storage tanks
Familiar, affordable to replace and able to deliver a large burst of hot water at once.
Hot water systems
Water Heaters for Metro Vancouver Homes
No hot water, a puddle under the tank or showers that run lukewarm too soon. We repair, replace and install tank, tankless and heat pump water heaters.
- Tanks and tankless
- Repairs and replacements
- Emergency help 24/7
No heat, no hot water or a gas smell? Call any time, day or night.
GAS WATER HEATER · Schematic
- 24/7 emergency service
- Tri-Cities, Burnaby, Surrey, Pitt Meadows, Maple Ridge
- Clear quote before work starts
- Tidy, respectful work
- Furnaces and boilers
- Air conditioning
- Heat pumps
- Water heaters
- Book online in about a minute
Overview
Choosing between water heaters for your home
Water heaters are one of the hardest-working appliances in a house, yet most people only think about theirs when it fails. Water heaters in Metro Vancouver homes come in three main types: storage tanks heated by gas or electricity, tankless units that heat on demand, and heat pump water heaters that move heat from the surrounding air into a tank.
Each has a place. A gas tank is simple and works during a power outage. Tankless saves space and supplies continuous hot water if it is sized well. A heat pump water heater uses far less electricity than a standard electric tank and qualifies for rebates in some programs. When yours needs attention, we look at your household size, gas and electrical capacity, venting and available space, then explain the options clearly.
Tank, tankless and heat pump compared
Six things that matter when you choose or replace a water heater.
Tankless on-demand units
Continuous hot water and wall-mounted installation, with flow limited by burner size.
Heat pump water heaters
An efficient electric option that also cools and dehumidifies the space where it sits.
Signs of a failing tank
Rusty water, rumbling noises, a leaking base or a pilot that keeps going out.
Sizing matters
Too small means cold showers; too large wastes energy keeping unused water hot.
Rebate help
Some efficient models qualify for utility or provincial programs, and we help with applications.
Included
Quick checks when your hot water acts up
- Is the pilot lit or the display showing an error code?
- Has a breaker tripped for an electric or heat pump unit?
- Is the gas supply on to other appliances?
- Is water dripping from the relief valve discharge pipe?
- Is there moisture or rust around the base of the tank?
- Is the thermostat set to around 60 degrees Celsius at the tank?
- Is the unit more than ten to twelve years old?
How it works
From no hot water to hot showers
- 1
Call or book
Tell us the type and age of your water heater and what is happening.
- 2
Diagnose the cause
We test ignition, controls, venting and the tank or heat exchanger.
- 3
Repair or replace
You get clear options with a quote for each, and we explain the trade-offs.
- 4
Haul away and test
Old tanks are removed, the new unit is commissioned and temperatures are checked.
Why choose Able Pro for hot water
Around-the-clock help
A leaking tank does not wait for business hours, and neither do we.
All three types
We install and service tanks, tankless and heat pump units, so advice is not tied to one product.
Safety first
Venting, relief valves, expansion tanks and seismic straps are checked on every install.
Tidy installs
We protect your floors and leave the utility room cleaner than we found it.
Questions homeowners ask us
Still unsure? Call (236) 222-2222 and talk it through with us.
How long does a hot water tank last?
Most gas and electric tanks last roughly ten to fifteen years. Soft Metro Vancouver water helps, but sediment still builds up and the anode rod wears out. Annual flushing and an anode check can extend tank life.
Should I replace my tank with a tankless unit?
It depends on your hot water use, gas supply and venting options. Tankless is excellent for continuous use, while a tank delivers a large volume quickly and is simpler to replace. We will compare both for your house.
Why is my water heater making popping noises?
Popping or rumbling usually comes from sediment at the bottom of the tank trapping water that boils under the layer. Flushing can help, though on an older tank it may be a sign that replacement is near.
Do water heaters need seismic straps in BC?
Yes. The BC plumbing rules require tanks to be strapped to resist earthquakes. We install straps on every new tank and check existing ones during service.
What is an expansion tank and do I need one?
When water heats, it expands. In homes with a pressure reducing valve or check valve, that extra volume has nowhere to go, and an expansion tank absorbs it. Without one, the relief valve may drip and fixtures can be stressed.
Can a heat pump water heater work in a basement?
Yes, if the space has enough air volume and stays above the minimum temperature in the manual. It cools the room slightly, which many owners appreciate in a damp basement.
Book your visit
Get your hot water back on
Call (236) 222-2222 any time or book online for water heater repair, replacement or installation.
Call or text, 24/7 for emergencies(236) 222-2222Request a visitTakes about a minute
We only use your details to arrange your visit.
Request received
Thanks! We will call you to confirm a time. Need us sooner? Call (236) 222-2222.