Central AC on a furnace
An evaporator coil is added above your furnace and connected to an outdoor condenser. Uses your existing ducts and thermostat.
New AC installs
Air Conditioning Installation Done Properly
Adding air conditioning to a home that has never had it takes more than bolting a condenser to a pad. We plan sizing, placement, drainage and power so it works for years.
- Load-based sizing
- Central or ductless
- Clean, quiet placement
No heat, no hot water or a gas smell? Call any time, day or night.
CENTRAL AIR CONDITIONER · Schematic
- 24/7 emergency service
- Tri-Cities, Burnaby, Surrey, Pitt Meadows, Maple Ridge
- Clear quote before work starts
- Tidy, respectful work
- Furnaces and boilers
- Air conditioning
- Heat pumps
- Water heaters
- Book online in about a minute
Overview
Planning an air conditioning installation
Most cooling problems we see in newer installs were baked in on day one: a unit too big for the house, a line set run too long, a condensate drain with no slope, or a condenser jammed beside a bedroom window. Good air conditioning installation avoids all of that with an hour of honest planning before any equipment is ordered.
We start by working out how much heat your home actually gains on a hot day, based on floor area, insulation, window size and which way the house faces. Then we look at your ductwork, if you have it, your electrical panel and the best spot for the outdoor unit. The result is a written quote for a system that fits your house, whether that is central air on your furnace, a ducted heat pump or a ductless mini-split.
Installation options we offer
The right choice depends mostly on whether you have ducts and how you heat the house.
Ducted heat pump
Installs like central air but also heats. A popular choice when the furnace is aging or you want to cut gas use.
Single-zone ductless
One indoor head and one outdoor unit. A neat fix for a hot top floor, a home office or a bedroom above the garage.
Multi-zone ductless
Several heads on one outdoor unit, each with its own control. Suits homes with baseboard or hot water heat.
Smart controls
Wi-Fi thermostats or app control let you pre-cool the house before a heat warning or adjust it from work.
Electrical work
New dedicated circuits, outdoor disconnects and, where needed, panel changes handled as part of the same project.
Included
What a proper install includes
- Heat gain calculation for your actual home
- Level pad or wall bracket for the outdoor unit
- Insulated copper line set, sealed where it enters the house
- Nitrogen pressure test and deep vacuum before charging
- Sloped condensate drain or pump where gravity will not work
- Dedicated circuit and weatherproof disconnect
- Start-up readings recorded for future comparison
- Walkthrough of the controls and filter care
How it works
Our installation process
- 1
In-home assessment
We measure rooms, look at ducts, attic access, panel capacity and outdoor placement, and ask what comfort problems bother you.
- 2
Written quote
You receive clear options with equipment details, so you can compare efficiency, noise level and features side by side.
- 3
Installation day
Most single systems take a day. We protect floors, keep the work area tidy and explain anything unexpected before acting.
- 4
Start-up and handover
We commission the system, check the temperature drop and refrigerant readings and show you how to run it efficiently.
Why install with Able Pro
Sized, not guessed
We size by calculation rather than by square footage rules of thumb, which avoids short cycling and clammy rooms.
Neighbour-friendly placement
We think about sound, airflow clearances and setbacks before choosing where the condenser sits.
Rebate guidance
If a heat pump qualifies for current programs, we help with the paperwork and confirm what applies.
Homes, not offices
Residential work is all we do, so the crew is used to working around families, pets and finished basements.
Near you
Air Conditioning Installation in your city
Related services
AC MaintenanceA maintenance plan turns AC care into something you never have to remember. We remind you, book the visit and keep a running...Air Conditioning RepairWarm air from the vents, a silent outdoor unit or water on the floor. Our technicians find the real cause and explain the fix...Air Conditioning ReplacementWhen an older AC needs a compressor, uses R-22 or simply cannot keep up, we help you decide what to replace it with and install...
Questions homeowners ask us
Still unsure? Call (236) 222-2222 and talk it through with us.
How long does air conditioning installation take?
A central AC or ducted heat pump on an existing furnace is usually a one day job. Ductless systems with several heads, or projects that need electrical upgrades, can take two or three days.
Do I need a permit for a new air conditioner?
In most Metro Vancouver municipalities, yes, for the electrical work and sometimes for the mechanical work as well. Rules differ between cities, so we explain what applies to your project as part of the quote.
What size air conditioner does my house need?
It depends on far more than square footage. Window area, insulation, ceiling height and sun exposure all change the answer. We calculate it during the assessment rather than guess.
Where should the outdoor unit go?
Somewhere with good airflow, out of the way of dryer vents and roof runoff, and not right under a bedroom window. We also check local setback and noise bylaws, which vary by city.
Can I install AC if my furnace is old?
You can, but it is worth pausing. The new coil has to match the furnace blower, and if the furnace will need replacing soon, a heat pump with a new air handler or furnace may be smarter. We will show you both paths.
Book your visit
Plan your new air conditioning
Call (236) 222-2222 or book an assessment online, and we will help you choose the right system for your home.
Call or text, 24/7 for emergencies(236) 222-2222Request a visitTakes about a minute
We only use your details to arrange your visit.
Request received
Thanks! We will call you to confirm a time. Need us sooner? Call (236) 222-2222.