Technicians on call 24/7 — Tri-Cities, Burnaby, Surrey & Maple Ridge

(236) 222-2222

info@ableproheating.ca

Annual furnace tune-ups

Furnace Maintenance for a Safer, Quieter Winter

One visit a year keeps your furnace clean, adjusted and safe, and gives you an honest picture of how much life it has left.

  • Carbon monoxide checks
  • Efficiency adjustments
  • Online booking

No heat, no hot water or a gas smell? Call any time, day or night.

GAS FURNACE · Schematic
  • 24/7 emergency service
  • Tri-Cities, Burnaby, Surrey, Pitt Meadows, Maple Ridge
  • Clear quote before work starts
  • Tidy, respectful work
  • Furnaces and boilers
  • Air conditioning
  • Heat pumps
  • Water heaters
  • Book online in about a minute
Overview

What yearly furnace maintenance does for you

Your furnace moves thousands of litres of air through your home every hour it runs. Along the way it collects dust, pet hair and lint, and its burners and sensors slowly drift out of adjustment. Annual furnace maintenance resets all of that. The technician cleans the parts that matter, checks that combustion is safe, and measures how well the furnace is moving heat into your rooms.

The benefits are practical. A tuned furnace lights reliably, burns gas more completely and runs fewer, longer cycles, which is easier on the motors and on your bill. You also get a safety check of the heat exchanger and venting, the parts that keep combustion gases out of your living space. If anything is worn, you hear about it in the fall, not in the middle of a January cold snap.

What to know

Signs your furnace is overdue for maintenance

If you notice any of these, book a tune-up sooner rather than later.

01

Dust building up quickly

Fast-returning dust on furniture suggests the filter or return air is not doing its job.

02

Yellow or flickering flame

Burners should show a steady blue flame. Yellow or lazy flames point to poor combustion that needs checking.

03

New sounds at start-up

Rumbling, whistling or a small bang when the burners light are worth investigating early.

04

Long gap since last service

If you cannot remember the last tune-up, it has probably been too long.

05

Dry, stuffy indoor air

Poor airflow and dirty filters can leave rooms feeling stale and uncomfortable.

06

Higher bills, same settings

If gas use is rising without a colder winter, efficiency is slipping.

Included

Our furnace tune-up checklist

  • Inspect the heat exchanger and flue for cracks or leaks
  • Clean burners, flame sensor and pilot assembly where present
  • Test ignition and safety controls
  • Check gas pressure and adjust for clean combustion
  • Inspect and lubricate the blower where applicable
  • Clear the condensate trap and drain on high-efficiency models
  • Test for carbon monoxide around the furnace
  • Replace or clean the filter and check the thermostat
How it works

What happens during your tune-up

  1. 1

    Book a convenient slot

    Choose a time online or call (236) 222-2222. Late summer and early fall are ideal.

  2. 2

    Inspect and test

    The technician runs the furnace, takes readings and inspects the key components.

  3. 3

    Clean and adjust

    Burners, sensors, drains and filters are cleaned, and settings are fine-tuned.

  4. 4

    Talk through results

    You hear what we found, what is in good shape and anything to plan for.

Why Able Pro

Why book furnace maintenance with Able Pro

Safety comes first

Every tune-up includes combustion and venting checks aimed at carbon monoxide risks.

Nothing pushed on you

If a part is fine, we leave it alone. If it is not, we explain why.

Care plans available

Join a maintenance plan and we will schedule your visit each year.

Tidy from start to finish

We protect floors and leave the furnace room clean.

Questions

Questions homeowners ask us

Still unsure? Call (236) 222-2222 and talk it through with us.

When is the best time for furnace maintenance?

Late August through October is ideal, before you rely on the furnace daily. It is still worthwhile in winter if you missed it, especially if the furnace is acting up.

How long does a tune-up take?

Most visits take about an hour to an hour and a half. If we find something that needs repair, we explain it and quote it before going further.

Can maintenance extend my furnace's life?

Regular cleaning and adjustment reduce strain on motors, igniters and the heat exchanger, which helps a furnace reach the full lifespan it was designed for. It cannot make a worn-out furnace new, but it prevents avoidable damage.

What can I do between visits?

Change the filter regularly, keep the area around the furnace clear, make sure supply and return vents are not blocked by furniture, and keep outdoor vent pipes clear of leaves and snow.

Do you check carbon monoxide during maintenance?

Yes. We inspect the venting and heat exchanger and test for carbon monoxide near the appliance. We still recommend working CO alarms on every level of your home.

Book your visit

Book your furnace tune-up today

Call (236) 222-2222 or schedule online, and head into winter knowing your furnace is clean, safe and ready.

Call or text, 24/7 for emergencies(236) 222-2222
Request a visitTakes about a minute

We only use your details to arrange your visit.

Book a visit