Blower motor and capacitor
Weak capacitors make motors run hot and fail early; we test them with a meter.
Many PoCo furnaces are now in the middle years of their life. That is exactly when regular maintenance does the most good.
No heat, no hot water or a gas smell? Call any time, day or night.
Port Coquitlam's family neighbourhoods were largely built from the 1970s through the 1990s, and many of those homes replaced their original furnace sometime in the 2000s or 2010s. That puts a lot of PoCo furnaces in the eight-to-fifteen-year range, when motors, igniters and control boards start to show wear. Furnace maintenance in Port Coquitlam is about catching that wear early.
A tune-up gives us measurements that reveal hidden trends. Rising amp draw on the blower can mean a failing motor or capacitor. An inducer motor with a faint whine may be losing its bearings. A heat exchanger with fresh rust streaks deserves a closer look. By spotting these in the fall, you can plan a repair on your schedule instead of waiting for a breakdown on a frosty night.
These components tend to show their age in mid-life furnaces.
Weak capacitors make motors run hot and fail early; we test them with a meter.
A rising hum or whine is often the first sign of bearing wear.
Igniters weaken with every cycle and can crack; we test their resistance.
Burnt contacts or loose connections cause intermittent no-heat problems.
Rust, cracks and scorching are checked for carbon monoxide safety.
Older duct joints can leak warm air into walls and crawlspaces.
Citadel Heights, Mary Hill and Oxford Heights have many larger family homes with furnaces at mid-life. In Lincoln Park, Glenwood and Birchland Manor, we often work in compact basements and utility rooms where furnaces have run for years with only occasional filter changes.
Townhouse complexes in Riverwood and near the Coquitlam River usually have smaller furnaces in closets. We keep these units clean and well ventilated so they do not overheat.
Book online or call (236) 222-2222 for a time that suits you.
We take readings on motors, igniters and gas pressure before cleaning.
Burners, sensors and blower components are cleaned and tuned.
If a part is wearing, we explain the readings and quote the fix.
Recommendations come from meter readings, not guesswork.
Find wear in the fall and fix it before winter.
We protect floors and clean up after every tune-up.
Our technicians are on call 24/7 if something fails.
Still unsure? Call (236) 222-2222 and talk it through with us.
Furnaces this age often start showing wear in the blower motor, inducer and igniter. Strange noises, longer start-ups or occasional no-heat episodes are warning signs. Maintenance measurements can catch these early.
Yes. Cleaning and adjusting reduce stress on motors and the heat exchanger. Replacing a weak capacitor, for example, can protect a blower motor from overheating.
It is often an airflow issue: long duct runs, leaks or a closed damper. During maintenance we can check airflow and suggest improvements.
Yes. We service furnaces in closets, basements and utility rooms, and check that each has proper combustion air and clearance.
Call (236) 222-2222 or book online for a Port Coquitlam furnace tune-up that tells you exactly where your system stands.
Call or text, 24/7 for emergencies(236) 222-2222We only use your details to arrange your visit.
Thanks! We will call you to confirm a time. Need us sooner? Call (236) 222-2222.