Inlet and outlet fittings
Corroded nipples or loose connectors on top of the tank often drip down the side. These are repairable.
Found water around your tank? It is not always the end. Able Pro traces leaks and repairs hot water tanks in Port Coquitlam, and tells you honestly when a tank cannot be saved.
No heat, no hot water or a gas smell? Call any time, day or night.
The most common reason people call us for hot water tank repair in Port Coquitlam is water where it should not be. Before anyone talks about replacing the tank, the question is where that water is actually coming from, because many sources are easy to fix.
A drip at the cold inlet or hot outlet fitting can often be resolved by replacing a connector or nipple. A relief valve that weeps may be worn, or it may be reacting to high pressure because the expansion tank has failed. A plastic drain valve can crack or fail to seal after flushing. Even condensation can fool people: a gas tank filled with very cold water can drip from the burner area briefly on startup.
Only when water is coming from the tank body itself is replacement the honest answer. We trace the source first and quote accordingly.
Most leaks fall into one of these categories, and several are simple repairs.
Corroded nipples or loose connectors on top of the tank often drip down the side. These are repairable.
Water from the relief valve line points to a worn valve or excess pressure. We find which.
Plastic drain valves can crack or fail to reseat. Replacing it with a brass valve is a quick fix.
A gas tank refilled with cold water may drip briefly from the burner area. It stops once the tank warms up.
A waterlogged expansion tank lets pressure spike, which can push water out of the relief valve.
Water seeping from under the jacket or base means the inner tank has corroded. That one needs replacement.
In the 1970s to 1990s family homes of Citadel Heights, Mary Hill and Oxford Heights, many tanks sit in basements or utility rooms beside finished living space. Catching a leak early there saves flooring and drywall.
In townhouse complexes around Riverwood, Glenwood and Birchland Manor, tanks are often in closets above or beside a neighbour's space. Fast leak tracing and a drain pan check are especially important in those homes.
We can talk you through shutting off the water and gas or power while we are on the way.
We dry things off and trace the leak to a fitting, valve or the tank itself.
If it is fixable, you get a quote and we repair it. If not, we explain replacement options.
We pressurize, run a heating cycle and check that everything stays dry.
You will not be told to replace a tank because of a leaking fitting.
Technicians are on call 24/7 at (236) 222-2222 when water is on the floor.
A clear quote comes before the repair, every time.
Wet areas are tidied and old parts are taken away when we finish.
Still unsure? Call (236) 222-2222 and talk it through with us.
No, but do not ignore it. Check whether the water is coming from the relief valve pipe, a fitting on top or the base of the tank. If you are unsure, turn off the cold supply and call us so we can trace it.
Either the valve is worn or pressure is rising too high when the tank heats, often because the expansion tank has failed. We test both. Never cap the discharge line, because the valve is a critical safety device.
Yes. We drain the tank enough to swap the valve, usually for a sturdier brass one, then refill and check for leaks.
That can be normal condensation as hot combustion gases meet a tank full of cold water. It should stop within an hour or so. If it continues, call us to check.
Call (236) 222-2222 now or book online. We will find the source and tell you honestly whether it can be repaired.
Call or text, 24/7 for emergencies(236) 222-2222We only use your details to arrange your visit.
Thanks! We will call you to confirm a time. Need us sooner? Call (236) 222-2222.