Slab radiant on lower floors
Walk-out basements on concrete warm up beautifully with in-floor tubing and low water temperatures.
Coquitlam hydronic installs
Boiler Installation in Coquitlam, BC
Hillside homes, radiant floors and multi-level layouts need a boiler that is sized and piped with care. We design the install before we pick up a wrench.
- Radiant floor expertise
- Multi-level zoning
- Clear written quote
No heat, no hot water or a gas smell? Call any time, day or night.
HYDRONIC BOILER · Schematic
- 24/7 emergency service
- Tri-Cities, Burnaby, Surrey, Pitt Meadows, Maple Ridge
- Clear quote before work starts
- Tidy, respectful work
- Furnaces and boilers
- Air conditioning
- Heat pumps
- Water heaters
- Book online in about a minute
Overview
Boiler installation in Coquitlam for hillside and newer homes
Many Coquitlam homes built on Burke Mountain and Westwood Plateau sit on slopes with three levels: a walk-out basement, a main floor and bedrooms above. That layout is great for in-floor radiant heat on the lower slab, but it also means long pipe runs, high points where air collects, and very different heat needs from one floor to the next. A boiler installation in Coquitlam has to account for all of that.
Able Pro plans each install with a heat-loss calculation by floor, separate zones where they help, and proper air elimination so the top floor does not gurgle. We explain the choices plainly, quote the job in writing, and test every zone before we leave.
What we design into Coquitlam installs
Small design choices make a big difference to comfort on a sloped lot.
Mixing for mixed emitters
When floors and baseboards share one boiler, a mixing valve keeps each loop at the right temperature.
Zones by floor
Bedrooms upstairs and a basement slab respond differently, so each gets its own thermostat.
Air removal at high points
Air separators and vents at the right spots keep upper-floor loops quiet.
Modulating condensing boilers
A boiler that turns down low suits radiant floors, which need gentle, steady heat.
Hot water for busy families
We match a combi or indirect tank to how many bathrooms are in use at once.
Local service
Installing boilers throughout Coquitlam
On Burke Mountain and Westwood Plateau, we mostly see newer homes where radiant floors and a modulating boiler make a natural pair. Elevation matters here too: these neighbourhoods catch more snow and colder nights than the valley floor, so outdoor reset curves are set with that in mind.
In Maillardville, Austin Heights and Ranch Park, older houses from the 1960s to 1980s often have original baseboard systems. There, a new boiler is usually about reusing good piping, adding proper air and dirt separation, and choosing between a combi and an indirect tank.
Included
Our Coquitlam install checklist
- Floor-by-floor heat-loss calculation
- Radiant tubing layout and loop lengths confirmed
- Mixing valve or low-temperature zone planned
- Air separator and high-point vents placed
- Expansion tank sized for total system volume
- Condensate route with neutralizer
- Combustion test and zone-by-zone check
How it works
Our install process, step by step
- 1
Site visit
We look at each level, the mechanical room and any radiant manifolds, and ask how you use each space.
- 2
System design
We lay out the boiler, zones, mixing and controls, then send you a clear price.
- 3
Clean installation
We install, fill and purge each loop separately so air does not get trapped upstairs.
- 4
Balance and explain
We balance flow across zones, confirm floor temperatures and show you the controls.
Why Coquitlam homeowners call Able Pro
Radiant done right
We understand low-temperature design, so floors stay comfortable and the boiler stays efficient.
Quiet upper floors
Careful purging and air elimination mean no gurgling in the bedroom loops.
Choices explained simply
You will understand why we recommend each component before you say yes.
Easy to reach
Book online or call (236) 222-2222, and reach us 24/7 if something goes wrong.
Near you
Boiler Installation in nearby cities
More from Able Pro in Coquitlam
All services in CoquitlamHeating, cooling and hot water help for Coquitlam homes, from new builds on Burke Mountain to classic split-levels in Austin...AC InstallationIn a three-storey Westwood Plateau home the top floor can run several degrees warmer than the basement. We design cooling that...AC MaintenanceWhether your system came with a Burke Mountain new build or has cooled a Ranch Park home for years, regular maintenance keeps it...AC RepairCoquitlam air conditioners tend to fail on day three of a heat warning, when they have been running flat out. Our technicians are...AC ReplacementMany Coquitlam homes from the 1990s and 2000s got basic builder-grade cooling. Replacement is your chance to get a system that...Boiler MaintenanceRadiant floors and multi-level systems stay comfortable when the boiler, water and controls are checked together. That is what...Boiler RepairGurgling upstairs, banging at night, a boiler that rumbles like a kettle. Noises are your system asking for help, and we know...Boiler ReplacementNot sure whether to fix your old boiler one more time or replace it? We give you a straight answer with the numbers and the...Furnace InstallationCoquitlam homes are often tall, split across a slope and full of stairs. We install furnaces that keep the top floor and the...
Questions homeowners ask us
Still unsure? Call (236) 222-2222 and talk it through with us.
Why does my upper floor need special attention on a Burke Mountain home?
Water carries air to the highest point of a system, and on a three-storey hillside home that is usually the bedroom loops. Without air vents and a proper separator, those loops gurgle and lose heat. We design air removal into the install from the start.
Can I add radiant heat to my Westwood Plateau basement with my existing boiler?
Possibly. If your boiler has spare capacity, we can add a low-temperature zone with a mixing valve. If it is already working hard, it may make sense to install a new modulating boiler that handles both.
Combi or indirect tank for a family of five?
With several bathrooms in use in the morning, an indirect tank usually keeps up better than a combi. A combi can work well for smaller households or where space is the priority.
What is outdoor reset and do I need it?
It is a sensor outside that tells the boiler how cold it is, so water temperature rises only when needed. Most modern boilers include it, and it noticeably improves comfort and efficiency.
Do radiant floors take long to warm up?
Yes, a concrete slab responds slowly. That is why we suggest steady thermostat settings rather than big setbacks, and outdoor reset to anticipate the weather.
Book your visit
Design your Coquitlam boiler system
Call (236) 222-2222 or book online for a site visit and a written plan for your home.
Call or text, 24/7 for emergencies(236) 222-2222Request a visitTakes about a minute
We only use your details to arrange your visit.
Request received
Thanks! We will call you to confirm a time. Need us sooner? Call (236) 222-2222.