Seismic straps
Current standards require tanks to be strapped to the wall so they stay put in an earthquake.
Replacing the tank is also the moment to fix what the last installer skipped. Able Pro replaces hot water tanks in Port Coquitlam and updates the whole setup to current standards.
No heat, no hot water or a gas smell? Call any time, day or night.
Many Port Coquitlam homes built in the 1970s through the 1990s are on their second or third water heater, and each swap may have been done a little differently. By the time we arrive for hot water tank replacement in Port Coquitlam, we often find a mix of old and new: missing seismic straps, a relief valve line that ends mid-air, no expansion tank and shut-off valves that will not fully close.
We do not just drop a new tank into that setup. A proper replacement includes straps anchored to framing, a relief valve discharge line that ends safely near the floor, an expansion tank where pressure requires it and new shut-offs and connectors.
Venting deserves special attention. If your furnace was upgraded to a high-efficiency model, the water heater may now be the only appliance on a large chimney. That can cause poor draft and condensation, and we correct it with a liner or a power-vent tank.
These items turn a simple swap into a safe, long-lasting installation.
Current standards require tanks to be strapped to the wall so they stay put in an earthquake.
The discharge pipe should run down to near the floor so hot water cannot spray on anyone.
Closed systems need somewhere for heated water to expand, or pressure spikes wear the tank out.
A tank alone in an oversized chimney may draft poorly. A liner or power-vent tank solves it.
Old gate valves and corroded connectors are replaced so the new tank starts with sound fittings.
We revisit the size based on your current household, not the last tank's label.
In Citadel Heights, Mary Hill, Oxford Heights and Lincoln Park, family homes often have chimneys shared with a furnace that has since been replaced. Venting corrections are a frequent part of replacements there.
In Riverwood, Glenwood and Birchland Manor, townhouse complexes and older bungalows bring tighter spaces and earlier tank installs that often lack straps and expansion tanks.
We note what is missing or outdated, from straps to venting.
You see the new tank and every upgrade on a clear quote.
The old tank comes out and the new one goes in with all corrections made.
We test draft, temperature and fittings, and show you the shut-offs.
We correct what earlier installs missed, so your new tank is safe from day one.
Every upgrade is listed on the quote before work begins.
We protect floors and leave the utility room tidy.
Tanks rarely fail at convenient times, so our technicians are on call 24/7 at (236) 222-2222.
Still unsure? Call (236) 222-2222 and talk it through with us.
Older installs often lack items that are now required or strongly recommended, like seismic straps, a proper relief valve line and an expansion tank. We list each one so you can see exactly why it is needed.
It is a gas water heater left alone on a chimney after the furnace was replaced with a high-efficiency model that vents elsewhere. The chimney is now too big for the small tank, which can lead to poor draft and condensation.
Gas water heater replacement requires a permit and inspection in BC. We arrange it as part of the job.
Yes, as long as space, gas supply and venting allow. We check all three before recommending a larger tank.
Call (236) 222-2222 or book online for a Port Coquitlam replacement quote that covers everything.
Call or text, 24/7 for emergencies(236) 222-2222We only use your details to arrange your visit.
Thanks! We will call you to confirm a time. Need us sooner? Call (236) 222-2222.