Separate suite furnace
A dedicated furnace for the suite gives each household its own heat and thermostat.
Surrey furnace installs
Furnace Installation in Surrey for Homes with Suites
Two households, one house? We install furnaces and controls that keep upstairs and the suite comfortable without arguments over the thermostat.
- Suite-friendly heating
- Large home zoning
- Clear, written quotes
No heat, no hot water or a gas smell? Call any time, day or night.
GAS FURNACE · Schematic
- 24/7 emergency service
- Tri-Cities, Burnaby, Surrey, Pitt Meadows, Maple Ridge
- Clear quote before work starts
- Tidy, respectful work
- Furnaces and boilers
- Air conditioning
- Heat pumps
- Water heaters
- Book online in about a minute
Overview
Furnace installation in Surrey, designed for how families live
Surrey has some of the biggest family homes in the Lower Mainland, and many of them include a basement suite. When one furnace serves two households, someone is always too warm or too cold, and the shared ductwork can carry cooking smells, noise and smoke between units. A furnace installation in Surrey is often the moment to fix that properly.
Depending on the layout, we might install separate furnaces for the main house and the suite, split the ductwork, add zoning with separate thermostats, or pair a furnace upstairs with a ductless heat pump downstairs. Large two-storey homes in Fleetwood, Fraser Heights and South Surrey also benefit from two-stage or modulating furnaces. Everything starts with a heat loss calculation and a clear written quote.
Surrey installation options
The best setup depends on your floor plan and who lives where.
Zoned single system
Dampers and separate thermostats can split one furnace into upstairs and downstairs zones.
Ductless for the suite
A wall-mounted heat pump heats and cools the suite independently, without new ducts.
Modulating furnaces
These adjust output in small steps, ideal for large open-plan homes with high ceilings.
Central A/C at the same time
New subdivisions get hot upstairs in summer, so many add cooling during the install.
Air separation
Separating return air between units helps limit smoke and odours travelling between households.
Local service
Furnace installs from Cloverdale to South Surrey
Newton, Panorama Ridge and Sullivan have many large homes built in the 1980s through 2000s with basement suites added later, often without changing the original single-furnace layout. Fleetwood and Guildford mix older family homes with newer infill. Cloverdale and Fraser Heights include newer subdivisions where homes are tighter and summer heat is a growing concern.
In South Surrey, larger homes with high ceilings and big windows benefit from modulating furnaces and careful duct design. Wherever you are in Surrey, we look at the whole house, not just the furnace closet.
Included
What we check in Surrey homes
- Heat loss for the main floor and the suite separately
- How return air is shared between units
- Gas meter and line capacity for a second furnace
- Space and venting for an extra appliance
- Thermostat locations for each household
- Permit and gas inspection arrangements
- Electrical capacity if a heat pump is added
How it works
Our Surrey installation process
- 1
Understand the household
We ask who lives where, what bothers them now and how the suite is used.
- 2
Design the layout
You get options, from zoning to separate systems, each with clear pricing.
- 3
Install with minimal disruption
We coordinate with you and any tenants and keep work areas clean.
- 4
Test each zone
Every thermostat, damper and furnace is tested so both households are comfortable.
Why Surrey homeowners choose Able Pro
Suite experience
We work in homes with suites every week and know the practical options.
Clear comparisons
Each option is priced so you can weigh comfort against budget.
Respect for tenants
We work carefully in occupied suites and keep things tidy.
On call 24/7
If either household loses heat, our technicians are available.
Near you
Furnace Installation in nearby cities
More from Able Pro in Surrey
All services in SurreyBig homes, basement suites and new subdivisions: we help Surrey families heat, cool and supply hot water to every floor and every...AC InstallationTwo households, three floors and one thermostat rarely end well. We design cooling for how Surrey families really share their...AC MaintenanceTwo systems, tenants downstairs and filters nobody remembers to change. We keep every unit in a busy Surrey household serviced on...AC RepairWhen cooling fails in a big Surrey house, it can affect the family upstairs and the tenants downstairs. We get everyone...AC ReplacementReplacing one big, old air conditioner with the same size again rarely fixes hot rooms. We look at zoning, staging and suite...Boiler InstallationBig houses, basement suites and households that use a lot of hot water need a boiler system designed for real demand, with each...Boiler MaintenanceWhen two households depend on one boiler, a breakdown affects everyone. Annual maintenance keeps heat and hot water steady for...Boiler RepairA boiler that starts and stops every few minutes, a suite that is always too hot, or controls that seem to have a mind of their...Boiler ReplacementReplacing the boiler in a big home with a suite takes planning. We schedule the work so both households know what to expect and...
Questions homeowners ask us
Still unsure? Call (236) 222-2222 and talk it through with us.
Can one furnace properly heat my Surrey home and basement suite?
It can provide heat, but comfort and air separation are harder. Zoning helps with temperature; a separate furnace or ductless unit gives each household full control. We explain what suits your layout.
Do suites need separate ductwork?
Many homeowners choose to separate air between units to limit smoke, odours and noise travelling through the ducts. Local requirements can apply, so we check how your home is set up and discuss options.
Is a modulating furnace worth it in a large Surrey home?
In big, open homes, modulating furnaces run longer at low output, which keeps temperatures steady and reduces drafts. They cost more up front, so we compare them with two-stage models for you.
Can I add A/C during the furnace installation?
Yes, and it saves time. We install a matching coil and outdoor unit together, or consider a heat pump that heats and cools.
Will the gas meter handle two furnaces?
Often it will, but it depends on the meter size and total appliance load. We calculate it and, if needed, help you arrange an upgrade with FortisBC.
Book your visit
Comfort for every Surrey household
Book a home assessment online or call (236) 222-2222, and we will design a furnace setup that works for upstairs and down.
Call or text, 24/7 for emergencies(236) 222-2222Request a visitTakes about a minute
We only use your details to arrange your visit.
Request received
Thanks! We will call you to confirm a time. Need us sooner? Call (236) 222-2222.