One larger tank
A 60 or 75-gallon tank can carry two households if the gas supply and venting can handle the bigger burner.
Two households, three bathrooms and one tank rarely end well. Able Pro installs hot water tanks in Surrey sized for suites, big families and everything in between.
No heat, no hot water or a gas smell? Call any time, day or night.
If there is one theme in hot water tank installation in Surrey, it is the basement suite. A great many homes in Newton, Fleetwood and Sullivan have a tenant or family members living downstairs, and both households draw from the same tank. When everyone showers between six and eight in the morning, a standard 50-gallon tank simply runs dry.
There are a few good ways to fix that. You can install a larger or high-recovery tank, put in a second tank dedicated to the suite, or switch to a tankless unit that heats on demand. Each has trade-offs in cost, space and gas supply, and we walk you through them plainly.
Separate tanks also make life easier for landlords. If one unit needs service, the other household still has hot water, and you can see who uses what.
Pick the setup that fits your household, budget and mechanical room.
A 60 or 75-gallon tank can carry two households if the gas supply and venting can handle the bigger burner.
A dedicated tank for the suite splits demand cleanly and keeps one household from emptying the other's supply.
When space is limited, a tank with a stronger burner reheats quickly enough to handle back-to-back showers.
Continuous hot water for big households, provided the gas line can supply the higher input.
Adding a second appliance or a larger burner may need a bigger gas line. We check the load before quoting.
Newer subdivisions often have pressure-reducing valves, so an expansion tank protects the new install.
In Newton, Fleetwood, Guildford and Sullivan, most of our installs involve homes with a basement suite and a shared mechanical room. Space for a second tank is often there, and gas line capacity is the deciding factor.
In South Surrey, Fraser Heights and Panorama Ridge, larger single-family homes with several bathrooms lean toward high-recovery tanks or tankless units. Newer subdivisions in Cloverdale tend to have power-vent tanks that we replace like for like or upgrade.
We find out how many people, bathrooms and households share the hot water.
You see the options side by side, with a clear price for the one you choose.
We set the tank or tanks, connect gas and water, and vent and strap everything.
We run hot water upstairs and down at the same time to confirm it keeps up.
We plan for two households, not one, so nobody is left with a cold shower.
Compare one tank, two tanks or tankless with honest numbers in front of you.
Straps, relief lines, expansion tanks and permits are included in the plan.
If a tank fails with tenants in the house, call (236) 222-2222 any time.
Still unsure? Call (236) 222-2222 and talk it through with us.
If both households regularly shower at the same time, a separate tank is usually the most reliable fix. It also means one tank failure does not leave everyone without hot water. We check space, venting and gas supply first.
Yes, if it is large enough or has a high recovery rate. A 60 or 75-gallon tank often works for two smaller households. For larger families upstairs and down, two tanks or tankless is safer.
Possibly. Your gas line and meter must handle every appliance running at once. We add up the loads and tell you if an upgrade is needed before you commit.
Set the tank sensibly and add a thermostatic mixing valve so tap water stays at a safe temperature. We can include one as part of the installation.
Call (236) 222-2222 or book online. We will size a setup that covers every household under your roof.
Call or text, 24/7 for emergencies(236) 222-2222We only use your details to arrange your visit.
Thanks! We will call you to confirm a time. Need us sooner? Call (236) 222-2222.