Flashing error lights
Sensor faults, communication errors and board failures show up as codes on ductless units.
Burnaby heat pump repair
Heat Pump Repair in Burnaby
Blinking lights on the wall unit, water on the floor or no heat at all? Able Pro diagnoses Burnaby heat pumps properly and fixes them with your approval.
- Error codes decoded
- Condo access handled
- On call 24/7
No heat, no hot water or a gas smell? Call any time, day or night.
DUCTLESS HEAT PUMP · Schematic
- 24/7 emergency service
- Tri-Cities, Burnaby, Surrey, Pitt Meadows, Maple Ridge
- Clear quote before work starts
- Tidy, respectful work
- Furnaces and boilers
- Air conditioning
- Heat pumps
- Water heaters
- Book online in about a minute
Overview
Heat pump repair in Burnaby, from towers to bungalows
Most heat pump repair in Burnaby happens in condos, where a single ductless system may be the only heat and cooling in the suite. When it stops, the place gets cold or hot quickly, and you cannot just open a window and hope. Many of these systems report trouble through a blinking light pattern or an error code on the remote. That code is a starting point, not a final answer, so we confirm the fault with real measurements before replacing anything.
In detached homes, central heat pumps can fail in more ways because there is more involved: ducts, an indoor air handler or furnace, a thermostat and backup heat. Either way, you get a written quote before we begin the repair.
Burnaby heat pump problems we fix often
These issues account for most of our repair calls in the city.
Water dripping from the head
Blocked drains, failed pumps or icing coils can leak onto floors and into the suite below.
No cooling on hot days
Glass-walled suites expose weak capacitors and low charge when the temperature climbs.
Lukewarm heat
Low refrigerant, dirty coils or a failing outdoor fan leave rooms short of heat.
Breaker keeps tripping
Shorted wiring, a failing compressor or a bad fan motor can trip the suite breaker.
Rattling balcony unit
Loose panels, failed mounts or fan damage cause noise that neighbours notice.
Local service
Repairing heat pumps across Burnaby
Our technicians repair ductless systems in high-rises around Metrotown, Brentwood and Edmonds, and in the UniverCity towers on Burnaby Mountain, where wind and damp can be harder on balcony units. We coordinate with concierge and building managers when roof or mechanical room access is needed.
We also repair central heat pumps in detached homes in Burnaby Heights, Capitol Hill, Deer Lake and the South Slope.
Included
Quick checks before booking
- Make sure the remote is in heat or cool, not dry or fan
- Swap the remote batteries
- Check the suite breaker panel for a tripped breaker
- Wash the indoor head filters
- Note any error code or blink pattern
- Look for ice on the indoor coil or lines
- Turn the unit off if water is leaking
How it works
Our repair process
- 1
Describe the problem
Call or book online and share any error codes, sounds or leaks you have noticed.
- 2
Diagnose on site
We test electrical, refrigerant and drain components to confirm the cause.
- 3
Quote and approve
You see the repair cost in writing before any parts are replaced.
- 4
Fix and confirm
We complete the repair and run the system to prove it is working.
Why Burnaby residents call Able Pro
24/7 emergency service
Technicians are on call around the clock when your only heat source stops.
Tested, not guessed
We confirm every error code with measurements before ordering parts.
Building-friendly
We work within your strata's rules for access, hours and common areas.
Approval before work
No repair starts until you have seen and agreed to the quote.
Near you
Heat Pump Repair in nearby cities
More from Able Pro in Burnaby
All services in BurnabyCondo towers in Metrotown and Brentwood, character homes in the Heights and everything in between. We keep Burnaby homes...AC InstallationA Metrotown tower suite and a 1950s Capitol Hill bungalow need very different cooling. We plan each install around the building...AC MaintenanceIn a Burnaby tower, your mini-split may be the only heat and the only cooling you have. Regular servicing keeps it clean, quiet...AC RepairA blinking mini-split in a Brentwood suite or a silent condenser behind a Capitol Hill house. We diagnose both, any hour of the...AC ReplacementIf your Burnaby air conditioner is worn out, its replacement can also take over most of your heating. That is why so many owners...Boiler InstallationFrom a wall-hung combi in a Brentwood townhome to a full hydronic system in a Burnaby Heights house, we plan every install around...Boiler MaintenanceWall-hung combis and condensing boilers are efficient, but only when they are kept clean. A yearly visit keeps your heat and...Boiler RepairAn error code on the display and a cold house. We diagnose lockouts on modern condensing and combi boilers and get the heat back...Boiler ReplacementMoving from an old cast-iron boiler to a modern condensing unit? We handle the details others skip, from flushing old radiators...
Questions homeowners ask us
Still unsure? Call (236) 222-2222 and talk it through with us.
My Burnaby condo heat pump is flashing a code. What does it mean?
Codes vary by brand and model, but they usually point to a sensor, communication, drain or refrigerant issue. Write down the pattern or code and tell us when you call. We will bring the right diagnostic tools and confirm the cause on site.
Water is leaking onto my neighbour's ceiling. What should I do?
Turn the heat pump off at the remote or breaker right away and wipe up what you can. Then call us. Common causes are a blocked drain line or a failed condensate pump, both of which we can usually repair quickly once diagnosed.
Can you repair a heat pump the builder installed in my Brentwood tower?
Yes. We repair most major ductless and central brands, whoever installed them. If a part is proprietary, we will let you know about ordering time before you approve.
Is a heat pump that will not cool in a heat wave an emergency?
It can be, especially for older adults, young children or anyone with health concerns in a hot suite. Our technicians are on call 24/7, so call us and we will advise on next steps.
Book your visit
Burnaby heat pump stopped working?
Call (236) 222-2222 day or night, or book a repair visit online.
Call or text, 24/7 for emergencies(236) 222-2222Request a visitTakes about a minute
We only use your details to arrange your visit.
Request received
Thanks! We will call you to confirm a time. Need us sooner? Call (236) 222-2222.