Ignition and flame sensing
We clean the flame sensor and test the hot surface igniter's resistance, the two most common no-heat culprits.
Prevent the breakdown
Furnace Preventive Maintenance That Stops Surprises
Most furnace failures give early warning signs that only show up on a meter or under a flashlight. Preventive maintenance finds them while they are still small.
- Yearly care plans
- Safety checks included
- Fewer winter breakdowns
No heat, no hot water or a gas smell? Call any time, day or night.
GAS FURNACE · Schematic
- 24/7 emergency service
- Tri-Cities, Burnaby, Surrey, Pitt Meadows, Maple Ridge
- Clear quote before work starts
- Tidy, respectful work
- Furnaces and boilers
- Air conditioning
- Heat pumps
- Water heaters
- Book online in about a minute
Overview
Why furnace preventive maintenance beats waiting for a repair
A furnace rarely dies without warning. A flame sensor slowly coats with oxidation until the burners drop out. An inducer motor bearing gets louder for a season before it seizes. A capacitor drifts below its rating and the blower struggles to start. Furnace preventive maintenance is about measuring these parts on a schedule and replacing or cleaning them before they leave you without heat on a cold night.
There is a cost side too. A furnace with a clean burner, correct gas pressure and full airflow uses less gas and puts less strain on its motors. Many manufacturers also expect yearly professional service as part of their warranty terms, so a dated service record can matter if a major part fails. With an Able Pro care plan, the visit is booked for you each year and you get a written note of what was checked and what to watch.
What preventive care protects
Each of these parts wears gradually, which is exactly why regular checks pay off.
Blower and inducer motors
Amp draw, bearing noise and capacitor readings tell us if a motor is wearing out ahead of time.
Heat exchanger integrity
A visual inspection for cracks, rust and scorching helps guard against carbon monoxide risks.
Gas pressure and combustion
Correct manifold pressure means a clean, efficient flame and less soot or wasted fuel.
Condensate system
High-efficiency furnaces produce water; a blocked trap or drain line can shut the unit down.
Airflow and filtration
Static pressure readings show whether filters and ducts are choking the system.
Included
Included in a preventive maintenance visit
- Clean and test the flame sensor and igniter
- Inspect burners and adjust gas pressure
- Check the heat exchanger and flue for damage or leaks
- Test limit, rollout and pressure safety switches
- Measure motor amperage and capacitor values
- Flush the condensate trap and check drain lines
- Measure temperature rise and static pressure
- Replace the filter and calibrate the thermostat
How it works
How our care plan schedule works
- 1
Join the plan
Sign up by phone or online and tell us about your furnace, its age and any past problems.
- 2
We book the visit
Before heating season, we contact you to arrange a convenient time, so you do not have to remember.
- 3
Full inspection and tune
The technician works through every check, cleans what needs cleaning and records the readings.
- 4
Written results
You get a summary of the furnace's condition, any parts nearing the end of their life, and a quote if work is needed.
Why plan members stay with Able Pro
No reminders needed
We keep track of the schedule and reach out when your visit is due.
Readings, not guesses
Recommendations are based on measured values you can see, not a sales pitch.
24/7 if something fails
Even well-kept equipment can break, and our technicians are on call around the clock.
Lower running costs
A clean, correctly adjusted furnace simply burns less gas to heat the same home.
Questions homeowners ask us
Still unsure? Call (236) 222-2222 and talk it through with us.
Is preventive maintenance different from a repair visit?
Yes. A repair visit fixes a problem that has already shown up. Preventive maintenance is a scheduled inspection and cleaning of a working furnace, aimed at finding wear before it causes a breakdown.
How often should preventive maintenance be done?
Once a year for most gas furnaces, ideally in late summer or early fall. Homes with pets, renovation dust or a suite sharing the system may benefit from extra filter changes between visits.
My furnace is only two years old. Does it need it?
New furnaces still collect dust, and the condensate system can clog early. Many manufacturers also expect annual service in their warranty requirements, so starting early is a good habit.
Will you replace parts during the visit?
Cleaning, filter changes and small adjustments are part of the visit. If a part needs replacing, we explain why, show you the reading and give you a price before doing anything.
Can the plan include my air conditioner or heat pump?
Yes. We maintain air conditioners, heat pumps, water heaters and other equipment, and can bundle them into one care plan so everything is checked on a schedule.
Book your visit
Put your furnace on a care schedule
Call (236) 222-2222 or book online to start preventive maintenance and spend this winter not thinking about your furnace.
Call or text, 24/7 for emergencies(236) 222-2222Request a visitTakes about a minute
We only use your details to arrange your visit.
Request received
Thanks! We will call you to confirm a time. Need us sooner? Call (236) 222-2222.