No heat or ignition lockout
Failed igniters, dirty flame sensors, gas valve faults or blocked condensate drains can all stop a boiler from firing.
Boiler repair, day or night
Boiler Repair When the Heat or Hot Water Stops
No heat, a dripping relief valve, banging pipes or an error code you cannot clear. We find the real cause and fix it, with technicians on call 24/7.
- 24/7 emergency service
- All boiler makes and ages
- Price approved before work
No heat, no hot water or a gas smell? Call any time, day or night.
HYDRONIC BOILER · Schematic
- 24/7 emergency service
- Tri-Cities, Burnaby, Surrey, Pitt Meadows, Maple Ridge
- Clear quote before work starts
- Tidy, respectful work
- Furnaces and boilers
- Air conditioning
- Heat pumps
- Water heaters
- Book online in about a minute
Overview
Boiler repair that finds the cause, not just the symptom
Boiler problems rarely come out of nowhere. A pilot that keeps going out may be a worn thermocouple, or it may be a venting draft problem. A relief valve that drips is usually a symptom of a waterlogged expansion tank, not a bad valve. Replacing the obvious part without asking why it failed is how the same problem comes back next month.
Our boiler repair visits start with a full look at the system: burner and ignition, venting, pressure, expansion tank, pumps, zone valves and controls. We explain what we found and what it will cost before we touch anything. If the boiler is unsafe to run, we tell you plainly and make it safe. For a breakdown at night or on a weekend, call (236) 222-2222.
Common boiler problems we repair
These are the calls we get most often, and what usually sits behind them.
Pressure too high or low
High pressure often means a failed expansion tank or fill valve. Low pressure points to a leak or a recent purge.
Leaks and drips
We trace water to its source, from relief valves and pump flanges to corroded fittings and cracked sections.
Banging, kettling, gurgling
Air in the lines, scale on the heat exchanger or a failing circulator each have a distinct sound.
Cold rooms or zones
Stuck zone valves, air locks and dead pumps leave parts of the house cold while the boiler runs.
Combi hot water faults
Lukewarm or fluctuating showers usually trace back to the flow sensor, diverter valve or plate heat exchanger.
Included
Before you call, it helps to check
- Is the thermostat calling for heat and does it have power?
- What does the pressure gauge read?
- Is there an error code on the boiler display?
- Is the boiler switch or breaker on?
- Are other gas appliances working normally?
- Is any water pooling under the boiler or pipes?
- If you smell gas or your CO alarm sounds, leave the house and call from outside
How it works
How our repair visit runs
- 1
Call or book
Reach us at (236) 222-2222 at any hour, or book online for non-urgent repairs.
- 2
Diagnose the system
We test the boiler and the parts around it to find what failed and why.
- 3
Quote the fix
You hear the options and the price before any repair starts.
- 4
Repair and verify
We fix it, run the boiler through a full cycle, check pressure and combustion, and clean up.
Why call Able Pro for boiler repair
Available around the clock
Technicians are on call 24/7 for no-heat and safety calls.
Old and new boilers
Standing pilot cast-iron units, modern condensing boilers and combis are all familiar territory.
No surprise invoices
We quote the repair and wait for your go-ahead before we start.
Safety first
Every repair ends with a check of venting and combustion, not just a boiler that fires.
Near you
Boiler Repair in your city
Related services
Boiler InstallationA new boiler is only as good as its sizing, piping and controls. We design the install around your heat loss, your emitters and...Boiler Preventive MaintenanceA yearly boiler tune-up catches weak parts, cleans what needs cleaning and confirms the venting is safe, before the first cold...Boiler ReplacementWhen a boiler is leaking, unsafe or simply worn out, we help you choose the right replacement and install it so the whole system...
Questions homeowners ask us
Still unsure? Call (236) 222-2222 and talk it through with us.
Why does my boiler pressure keep rising?
The most common cause is an expansion tank that has lost its air charge, so there is nowhere for heated water to expand. A leaking fill valve that keeps feeding water in can do the same. Either way, the relief valve may start to drip, which is a sign to call.
My boiler shows an error code. Should I keep resetting it?
One reset is reasonable. If it locks out again, stop, because repeated resets can flood the combustion chamber or mask a venting or flame problem. Note the code and call us.
Why is one zone cold while the rest of the house is warm?
Usually a zone valve that is not opening, a failed zone pump, or an air lock in that loop. We check the thermostat wiring and the valve motor, then purge the loop if air is the problem.
Is it worth repairing an old cast-iron boiler?
Often it is. Cast-iron boilers can run for a very long time if the heat exchanger is sound. If sections are cracked or leaking, or parts are no longer available, we will tell you honestly and explain replacement options.
What should I do if my CO alarm goes off?
Get everyone out of the house, call 911 or your gas utility's emergency line from outside, and do not go back in until it is cleared. Then call us to find and fix the cause before the boiler runs again.
Book your visit
Boiler down? Call us now
Call (236) 222-2222 any time, or book online for a repair at a time that suits you.
Call or text, 24/7 for emergencies(236) 222-2222Request a visitTakes about a minute
We only use your details to arrange your visit.
Request received
Thanks! We will call you to confirm a time. Need us sooner? Call (236) 222-2222.