Coil corrosion
White powder or flaking on fins is an early sign that the coil needs cleaning and protection.
Damp air off Burrard Inlet is hard on outdoor coils and kind to mould. Regular service from Able Pro helps your Port Moody heat pump last longer and smell fresher.
No heat, no hot water or a gas smell? Call any time, day or night.
Moisture is the theme in Port Moody. The inlet keeps humidity high for much of the year, mornings are often foggy, and shaded hillside lots can stay wet for days. Outdoor coils hold onto that moisture along with airborne salt and grime, and over time it eats into the fins and fittings. Indoors, damp conditions help mould and bacteria grow inside ductless heads and on drain pans.
That is why heat pump maintenance in Port Moody includes a thorough freshwater rinse of the outdoor coil, a close look for early corrosion on fins, fittings and the cabinet, and a careful clean of indoor coils, blower wheels and condensate lines. We measure refrigerant performance too, because corrosion can cause pinhole leaks that slowly drain the system.
Catching these early is much cheaper than replacing a coil or drywall.
White powder or flaking on fins is an early sign that the coil needs cleaning and protection.
Corroded tubing can leak slowly, so we watch readings for gradual changes over time.
Damp coils and wheels grow mould that you can smell and sometimes see on the louvres.
Algae and biofilm block drain lines and lead to water running down the wall.
Contactors and terminals corrode in damp outdoor units and can cause intermittent faults.
Moisture in bearings leads to squealing, then a fan that will not turn at all.
Homes along the water in Ioco, Klahanie and Moody Centre see the most salt and moisture, so we check their outdoor units closely for corrosion. Condos at Suter Brook and around the stations often have ductless heads in bedrooms that benefit from regular deep cleaning.
Up the hill in Heritage Mountain, College Park, Glenayre and Pleasantside, shade from tall trees keeps units damp and adds needles and moss to the mix.
Tell us whether you have a ducted or ductless system and how many indoor heads.
We inspect and rinse the outdoor unit and check for corrosion and loose parts.
Indoor heads or the air handler are cleaned, drains are flushed and airflow is checked.
We record performance and share simple steps to slow corrosion between visits.
We know what inlet air does to equipment and check for it every visit.
Ductless heads are cleaned properly, with walls and floors protected.
Anything we find is explained and quoted before work starts.
If your system fails at night, someone is on call to help.
Still unsure? Call (236) 222-2222 and talk it through with us.
Yearly at minimum, and twice a year for homes close to the water or systems that run constantly. More frequent rinsing slows the build-up of salt and grime on the coil.
Early surface corrosion can be cleaned and slowed. Once the coil has pinhole leaks, the fix is usually a coil replacement or, on older units, a new system. Catching it early gives you more options.
Damp coastal air plus months of use lets mould grow on the indoor coil and blower wheel. A proper deep clean removes it, and keeping the fan running briefly after cooling can help the coil dry out.
Gently rinse the outdoor coil with a garden hose a few times a year with the power off, keep plants and moss away from the unit and clean indoor filters regularly.
Call (236) 222-2222 or book online for maintenance built for damp inlet air.
Call or text, 24/7 for emergencies(236) 222-2222We only use your details to arrange your visit.
Thanks! We will call you to confirm a time. Need us sooner? Call (236) 222-2222.