Pilot won't stay lit
On older furnaces, a worn thermocouple or dirty pilot is a common no-heat cause.
From pilot-light furnaces in Burnaby Heights to compact closet units near Metrotown, our technicians fix what is broken and explain it clearly.
No heat, no hot water or a gas smell? Call any time, day or night.
Burnaby's housing spans many decades, and so do its furnaces. Some older homes still run standing-pilot furnaces, where a thermocouple or pilot assembly is often the culprit when the heat stops. Townhouses and newer homes rely on electronic ignition, control boards and inducer motors, which fail in different ways. Furnace repair in Burnaby means being comfortable with all of it.
Townhouse closet furnaces have their own patterns. Tight spaces and blocked louvres can starve the furnace of combustion air, while clogged filters cause it to overheat and trip the high-limit or rollout switches. A rollout switch trip is a safety warning, not just a nuisance, and needs a proper look before the furnace is reset.
These problems come up regularly in local homes.
On older furnaces, a worn thermocouple or dirty pilot is a common no-heat cause.
Flames escaping the burner area indicate a venting or heat exchanger issue that needs inspection.
Restricted air in tight closets trips the high-limit switch.
Humming without airflow, or a burning smell, often points to the blower or capacitor.
Erratic operation or no response can mean a failed board or loose wiring.
A valve that will not open or regulate properly prevents safe burner operation.
In Burnaby Heights, Capitol Hill and Lochdale, older detached homes may still have standing-pilot or early electronic ignition furnaces. Parts can be harder to source, and we tell you up front if that is the case.
Townhouses and newer homes around Metrotown, Brentwood, Edmonds and UniverCity often have compact furnaces in closets. Combustion air and airflow problems show up frequently, and we fix the cause, not just the symptom.
Call (236) 222-2222 any time, or book online for non-urgent repairs.
We check controls, ignition, airflow and venting to pinpoint the fault.
You see a clear price before we begin.
We fix the issue, run full cycles and confirm safe operation.
Technicians on call 24/7 for no-heat emergencies.
We repair standing-pilot units and modern furnaces alike.
We investigate safety trips instead of just resetting them.
Clear pricing before any work begins.
Still unsure? Call (236) 222-2222 and talk it through with us.
Often, yes. Thermocouples, pilot assemblies and gas valves are commonly replaced. If parts are no longer available or the heat exchanger is worn, we will discuss replacement honestly.
Closet furnaces with clogged filters or blocked louvred doors often overheat. Clearing the space and replacing the filter may help, but if it continues, call us to check the blower and airflow.
It means flames or heat escaped the normal burner area, possibly due to a blocked vent or damaged heat exchanger. Do not keep resetting it; have the furnace inspected.
Get everyone outside and call 911. Do not re-enter until responders say it is safe, then have the furnace checked before using it.
Call (236) 222-2222 any time or book a repair online, and we will diagnose and fix the problem properly.
Call or text, 24/7 for emergencies(236) 222-2222We only use your details to arrange your visit.
Thanks! We will call you to confirm a time. Need us sooner? Call (236) 222-2222.