Technicians on call 24/7 — Tri-Cities, Burnaby, Surrey & Maple Ridge

(236) 222-2222

info@ableproheating.ca

Air filter basics

How Often to Change Your Furnace Filter, and Why It Matters

A clean filter protects your furnace or heat pump, helps it run efficiently and keeps dust down. Here is how often to change it and how to pick the right one.

3 min read·May 28, 2024

AIR TREATMENT · Schematic

What your air filter actually does

The filter in your furnace, air handler or heat pump sits in the return airflow, catching dust, lint, pet hair and other particles before air passes over the blower and coils. Its first job is protecting the equipment. A side benefit is cleaner air in your home.

When the filter clogs, the blower has to work harder to pull air through. Airflow drops, rooms heat or cool unevenly, and parts run hotter than they should. Knowing how often to change your furnace filter is one of the simplest ways to avoid service calls.

How often to change it: a practical guide

There is no single rule, because homes and filters differ. Use these as starting points, then adjust based on what you see when you pull the filter out.

  • Basic 1-inch filters: check monthly and replace every one to three months.
  • Pleated 1-inch filters in homes with pets: replace every month or two.
  • Thicker 4- or 5-inch media filters: often every six months to a year, depending on the product and household.
  • Ductless heat pump heads: rinse the washable filters every few weeks during heavy use.
  • Homes under renovation: check weekly, since drywall and sawdust clog filters fast.

Signs your filter needs changing now

Sometimes the filter tells you before the calendar does. Pull it out and look if you notice any of these.

  • The filter looks grey and matted, and light no longer passes through it
  • More dust settling on furniture than usual
  • Weak airflow from the vents
  • The furnace or heat pump runs longer than usual to reach temperature
  • Ice on the indoor coil or refrigerant lines in summer
  • The furnace shuts off on overheating and restarts repeatedly

Choosing the right filter and MERV rating

Filters are rated by MERV, a scale that describes how well they catch particles of different sizes. Higher numbers catch finer particles but can also restrict airflow if your system is not designed for them.

For most homes, a pleated filter in the MERV 8 to 11 range is a sensible balance. Households with allergies or asthma may benefit from a higher rating, but it is safer to use a thicker media filter cabinet than to force a very dense 1-inch filter into a slot built for a basic one. If you are unsure what your system can handle, ask a technician during your next maintenance visit.

Why it matters in Metro Vancouver

Several local conditions affect how quickly filters load up. Summer wildfire smoke from the Interior can drift into the region, and a good filter helps reduce the particles inside your home on smoky days. Cottonwood fluff and pollen in spring add to the load. Damp winters keep windows closed and air recirculating for months.

Heat pumps also run in both seasons, so their filters see more use than an old furnace that only ran in winter. If you have recently switched to a heat pump, you may need to change filters more often than you are used to.

How to change a furnace filter

Changing a filter takes a few minutes and no special tools.

  • Turn the thermostat off, or switch the furnace off at its service switch.
  • Open the filter slot or cabinet, usually on the side of the furnace or in a return grille.
  • Note the size printed on the frame and the arrow showing airflow direction.
  • Slide in the new filter with the arrow pointing toward the furnace.
  • Close the cover securely so air does not bypass the filter, then turn the system back on.
  • Write the date on the frame so you know when it went in.

Beyond the filter: better indoor air

A filter is the first step, not the only one. Whole-home options include UV purifiers that sit near the coil to limit mould and bacteria growth, humidifiers for dry winter air in some homes, and media cabinets that hold thicker filters. Clean ducts and a clear dryer vent also help, and the dryer vent matters for fire safety too.

Able Pro helps homeowners in Coquitlam, Port Coquitlam, Port Moody, Burnaby, Surrey, Pitt Meadows and Maple Ridge with filters, indoor air quality equipment and regular maintenance. If you are not sure which filter suits your system, call (236) 222-2222 or book a visit online and we will check it for you.

Questions

Questions homeowners ask us

Still unsure? Call (236) 222-2222 and talk it through with us.

Can a dirty filter damage my furnace?

Over time, yes. Restricted airflow makes the blower work harder and can overheat the heat exchanger, triggering safety shutdowns. In cooling mode, it can freeze the coil.

Is a higher MERV filter always better?

Not always. Very dense filters can choke airflow in systems not designed for them. A MERV 8 to 11 pleated filter suits most homes, and a thicker media cabinet works better for higher ratings.

Do I need to change the filter in summer if I have a heat pump?

Yes. Heat pumps run year-round, so the filter collects dust in summer too. Check it monthly and replace or clean it as needed.

Book your visit

Not sure which filter you need?

Call Able Pro at (236) 222-2222 or book online and we will help you choose and set up the right one.

Call or text, 24/7 for emergencies(236) 222-2222
Request a visitTakes about a minute

We only use your details to arrange your visit.

Book a visit