Mini-split error codes
Blinking lights point to sensors, communication faults or protection trips. We read and test to confirm.
A blinking mini-split in a Brentwood suite or a silent condenser behind a Capitol Hill house. We diagnose both, any hour of the day.
No heat, no hot water or a gas smell? Call any time, day or night.
Most AC repair in Burnaby falls into two groups. In condos and townhomes, it is usually a ductless heat pump: a head flashing an error code, water dripping down the wall onto hardwood, or a unit that runs but barely cools. In detached homes, it is more often central air on a furnace, with a failed capacitor, a frozen coil or a condenser that hums without starting.
We carry the tools and know-how for both. For mini-splits, we read the fault code, then test the sensor, board or motor it points to. For central systems, we check the furnace side and the outdoor unit together. In every case, you hear what failed and what it costs to fix before we touch anything.
What we fix most often in local homes.
Blinking lights point to sensors, communication faults or protection trips. We read and test to confirm.
Clogged drains and failed condensate pumps send water down walls in condo suites.
Dirty coils, low refrigerant or a struggling outdoor fan leave west-facing condos hot by afternoon.
In houses, failed capacitors and contactors are the leading cause of a dead outdoor unit.
Ice on the coil above the furnace points to airflow or refrigerant issues.
Repeated tripping signals an electrical fault that needs testing, not resetting.
We repair cooling in high-rise suites around Metrotown, Brentwood and Edmonds, townhomes at UniverCity, and houses in Burnaby Heights, Capitol Hill, Lochdale and the South Slope. Glass towers heat up quickly on sunny afternoons, so a failed mini-split can make a suite uncomfortable within an hour or two.
In older Burnaby houses, AC is often a later addition to an original furnace, and many repairs trace back to that pairing: a tired blower, a mismatched coil or a drain routed poorly. We check the whole system so the fix lasts.
Call (236) 222-2222 with the make, symptoms and any error code.
For condos, we coordinate parking, elevators and roof or balcony access with you.
We test the faulty part, explain the cause and give you a price first.
After the repair, we verify cooling, drainage and normal operation before leaving.
Technicians are available day and night for urgent cooling failures.
We know building access rules and work quietly in occupied suites.
Heat pump and mini-split repair is a big part of our Burnaby work.
You approve the repair and its cost before we start.
Still unsure? Call (236) 222-2222 and talk it through with us.
Write down the light pattern or code, turn the unit off at the breaker for a minute and restart it. If the code returns, call us with the brand and the code so we can come prepared.
It should be dealt with quickly to avoid damage to drywall and flooring, and to your neighbours below. Turn the unit off and call us. It is usually a blocked drain or failed pump.
Only if the outdoor unit is on the roof. Many Burnaby buildings require advance notice for roof access, so tell us when you call and we will help coordinate.
Yes. We test the condenser, the furnace blower, the coil and the controls to find the fault, whichever part of the system it is in.
Reach Able Pro at (236) 222-2222, day or night, or book your AC repair online.
Call or text, 24/7 for emergencies(236) 222-2222We only use your details to arrange your visit.
Thanks! We will call you to confirm a time. Need us sooner? Call (236) 222-2222.